Caterpillar brings Electric Drive to Cat D6 Dozer

First high-drive electric drivetrain delivers up to 35% better fuel efficiency and reduced service and maintenance costs
Listen to this article

Caterpillar is replacing the D6T with the new 215 hp Cat D6 dozer capable of up to 35% fuel savings with its electric powertrain or 20% better economy with a new four-speed powershift transmission. A redesigned VPAT dozer cuts weight and 10-roller undercarriage option speeds fine grading. Together with updated technology, a tractor with operating weights from 48,000 to 53,000 lb. offers significant grading advantages.

The D6 XE’s next-generation electric drive system (shown below right) puts the instantaneous torque of electric motors in their first high-drive power train, keeping the tractor from bogging down when encountering a load. Constant power to the ground, continuous push and greater maneuverability mean faster cycle times. Nothing has to ramp up for it to deliver maximum push, making electric drive the top choice for high productivity and fuel efficiency.

Caterpillar says the added productivity and reduced fuel cost mean customers working the machines hard can expect the D6 XE to earn back in less than two years the 10% premium you pay on top of the cost for the standard, mechanical-drive D6.

The D6 is powered by a four-speed automatic transmission that can increase fuel efficiency up to 20% compared to the three-speed D6T. The fully automatic D6 reduces momentary hesitation when the traditional machine shifts, so more momentum and drawbar power are maintained through each push. The auto shift works up and down the entire speed range, to optimize power to the ground and fuel consumption.

Both power trains offer unprecedented ease of operation. The operator can simply set the ground speed and the dozer will continuously optimize for maximum power and efficiency based on load. With electric drive, there are no gears to shift. The automatic four-speed power train optimizes the transmission without the operator having to shift.

The Variable Power Angle Tilt (VPAT) dozer has a redesigned structure that is stronger, yet lighter, so machine balance is optimized for grading without the need for a rear implement or counterweight. A wide gauge LGP VPAT design, with 36-in. centered shoes, puts more track on the ground to reduce ground pressure to 5 psi. A new optional finish grading undercarriage has ten bottom rollers for smoother grades at higher speeds, even in difficult surfaces like sand and gravel.

The dozers are available with an updated, factory integrated Cat GRADE with 3D system with a 10-in. touch screen and more intuitive operator interface. The system uses advanced Inertial Measuring Units (IMU), which provide greater speed and accuracy without position sensing cylinders. Smaller antennas are integrated into the cab roof for even better protection. AutoCarry is included to automate blade lift to maintain desired blade load, improving load consistency and reducing track slip.

Cat Slope Indicate is standard, showing the machine cross-slope and fore/aft orientation on the primary monitor for quick and easy reference. Cat GRADE with Slope Assist provides basic blade positioning assistance without the need for added hardware or a GPS signal. 

Factory Attachment Ready Option (ARO) provides optimal mounting locations, brackets, and hardware and simplifies installation of an aftermarket grade control system.

Other features include:

  • Up to 12% reduction in service and maintenance costs via updated components, longer service intervals and fewer scheduled maintenance tasks
  • Optional Heavy Duty Extended Life undercarriage with Positive Pin Retention pins and link improvements for up to 20% more seal life in high impact conditions
  • Cat C9.3B diesel engine features a redesigned fuel system, elimination of the NOx Reduction System and a simplified single engine Electronic Control Module (ECM)
  • Redesigned cab with 10-in. touchscreen display and standard wider air suspension seat or heated/cooled leather seat options
  • Distributed cab heating/cooling with automatic temperature and blower control circulates air more effectively
  • Available in VPAT or push arm configurations with standard or two widths of Low Ground Pressure (LGP) undercarriage
  • Cat LINK telematics technology

 

Magazine & eNewsletter

Printed Monthly Magazine

Published monthly, Material Handling Wholesaler offers feature columns and special coverage of relevant industry issues and products.

Digital Monthly Magazine

Published on the fourth Thursday of each month, Material Handling Wholesaler offers feature columns and special coverage of relevant industry issues and products.

Material Handing Wholesaler Weekly Newsletter

Our Weekly newsletter is emailed every Tuesday and contains the latest Industry Events and People News, Source Directory, and important Industry Links.

Forklift International Weekly Hot Sheet Newsletter

Published every Monday morning with the latest material handling equipment
available for sale.

Share the Post:

Related Posts

Our Current Issue

Magazine & eNewsletter

Our magazine is published and mailed monthly, Material Handling Wholesaler offers feature columns and special coverage of important industry issues. 

Weekly Newsletter – Get the latest industry events and people news in this weekly e-newsletter as well as direct access to Wholesaler’s Source Directory and link.

Current Supplements







Arnold Magnetic Technologies highlights the PLASTIFORM® High Energy Flexible Magnets, Made in America

Listen to this article Arnold Magnetic Technologies Corporation (Arnold), a subsidiary of Compass Diversified and a global manufacturer of high-performance…

Plezia named Port of Long Beach Engineering Managing Director

Listen to this article The Port of Long Beach has promoted Suzanne Plezia, P.E., to Managing Director of Engineering Services…

Ati Motors introduces the Sherpa 10K: High-capacity Autonomous Tug designed for demanding industrial workflows

Listen to this article New heavy-duty vehicle sets a new standard for autonomous material movement Ati Motors, a global provider…

Gebrüder Weiss renews scholarship program for Rutgers Business School

Listen to this article Gabriel Godoi De Lima, Jun Pak, and Nikhil Walia are 2025 scholarship recipients  Gebrüder Weiss has announced…

NY/NJ Foreign Freight Forwarders & Brokers Association Announces 2025 “Captain of Industry” Award Recipient

Listen to this article Charlene Riley to be Honored at June 25th Dinner Cruise Co-Hosted with the Traffic Club of…